Wooden Logic Display Surrounds Pt. 3

Once all parts are cut, we need to glue them together.  I used the panel from the outer dome as a guide to test the fit of the wood pieces.  After verifying the fit, I took some wood glue and put it on each side of the wood pieces and assembled them in the panel.  After one hour, they were dry and awaiting a bit more cutting.

After the glue is dry, we take the piece out of the panel carefully so we don’t bend the panel.  The panel is made of Aluminum so it can bend easy.  The outside area is then cut to fit the inside of the panel per the plan.

This is a quick video of the whole process for cutting and constructing the wooden logic display surrounds.

Leave a Reply

Your email address will not be published. Required fields are marked *